Cake Pop Mold How To Use

Yesterday I set out to attempt a baking CRAFT that I have been wanting to try for awhile now – CAKE POPS.

Cake Pops (term and assembly method credited mainly to Bakerella) have taken the country by storm.  And what’s not to love?  Cake – icing – toppings – chocolate… all on a STICK.  I bought a set of 2 silicone cake pop molds and spent a few minutes on Google trying to find tips on how to use them.  I didn’t find much.

Instead, I found a post from Love from the Oven – all about making cake pops by hand.  Hmm.  I hadn’t even considered doing that.  I had always figured it was too much work.  But her post convinced me that it was worth a try because they were a little bigger, looked a bit tastier and gave me so many more flavor possibilities.

The Best Cake Pops / Chocolate Dipped

So let’s start with the silicone mold because I made the pops both ways.  Making the batter was simple – I used Pillsbury Funfetti cake mix because it’s what I had on hand.  I prepared it according to the directions on the box, but I added one extra egg and instead of 1 cup of water, I used 1/2 cup of milk.  (That was a suggestion that came with the silicone mold directions.)

The directions did not say whether or not I should grease the molds, so I did just in case (using non-stick cooking spray).  I filled each of the two bottom molds almost completely.  Then I placed the top molds over the bottom, securing them into place.  (I put the cake pop molds on a baking tray to keep everything a little more sturdy.)

I baked these guys for 16 minutes at 350 degrees.  After they came out of the oven they sat (in the molds) on a cooling rack for a half hour or so before I popped them out and onto a plate.

Standard Cake Pop Mold

I had some batter left over from the molds…  that’s what gave me the inspiration to try making cake pops “by hand” as well.  I dumped the rest of the batter into a baking dish and when the molds came out of the oven, this dish went in for about 20 minutes.

After cooling for at least an hour, I was ready to get down and dirty with the cake.  I scored the cake into squares to break it up a bit.

Then I scooped each piece out of the dish, two or three at a time.  I crumbled them by hand into a bowl.  (You could use a food processor to crumble the cake, but honestly, it went so quickly by hand – a food processor might not be worth the hassle.)

Cake Pop Mold

Add 1/2 to 3/4 can of frosting to your cake crumbles.  I used cream cheese frosting – again, because it’s what I had on hand.  Next time I try this I want to make the cake and frosting from scratch!

Now you need to chill your mixture.  You can do this by placing the bowl in the refrigerator for a few hours or in the freezer for 15-30 minutes.  By the time I got around to crumbling and mixing, it was later at night, so I left my bowl in the fridge overnight.

I pulled the silicone mold cake pops out of their container and placed them next to each other.  The difference is pretty obvious – not just the size (because I could have hand rolled mine to be smaller) but the cake pops from the molds will be straight up cake.  They are lighter and fluffier and well, more cake-like.  The pops that I hand rolled are dense, moist and pre-mixed with frosting.

Best Cake Pop Molds For 2023

Helpful tip – sometimes the candy stick has trouble staying in the cake pop – especially when you are dipping it into the thick melted chocolate.  What worked best for me, was to poke a hole into each cake pop with the stick  Then I dipped the stick into the melted chocolate and put the stick back into the cake pop.  I let the pop sit for a few minutes before attempting to dip in the chocolate – letting the stick set a bit.

I held the cake pops over a small bowl and shook various sprinkles over the entire pop.  I placed them standing up in small holes covering the top of a cardboard box.  (A piece of styrofoam would work great for this.)

Now, there were definitely a few OOPS moments along the way – several pops collapsed because I accidentally shoved the sticks in too far.

How To Use Cake Pop Moulds

Several pops that threatened to join the carnage pile were saved because I placed them top down on wax paper before they could fall apart.

With the smaller (silicone molded) pops, I tried something else – I left the stick off and just covered them in chocolate.  Then I placed them on wax paper and sprinkled.

I have to say – first attempt – I’m totally pleased.  I am glad that I got over my intimidation and just made them.  I can’t wait to make more!!

Rigrer Bpa Free Silicone Cake Pop Mold With 100 Cake Pop Sticks + 100 Treat Bags

And how did I like the molds vs. the by-hand method?  If I was pressed for time, the molds would be AWESOME – they are a total time saver and SO simple to use!  I enjoyed the taste of the hand-made pops way more than the cake that popped out of the molds – so if flavor was my goal, I would go the more labor-intensive route.How to Make Cake Pops or Cake Balls Three Ways: Traditionally cake pops are made with crumbled cake. I’ll show you how to make the traditional homemade cake pop along with using a silicone mold and donut holes. Cake pops are the perfect little party treat. They can either be placed on a stick or sitting on a tray as cake balls. These easy to make party treats and can be made in advance. Scroll down for all the details with a lot of helpful tips.

You can make a homemade cake, but there is no shame in using a boxed cake mix. For added flavor and to create a more dense cake pop try adding a small package (3.4 ounce) of pudding mix to the cake batter.

I have two favorite ways of protecting the cake pops while the candy is drying. 1. STYROFOAM: Using the same size lollipop stick as the cake pops, make holes a few inches apart in the styrofoam. This will make placing the wet cake pops easier then having to make holes while the cake pops are wet. 2. RICE: Pouring rice into a container that is as deep as the cake pops (with the sticks) and wide enough to hold several will keep cake pops from falling over while drying.

Use Cake Pop Molds To Make The Treat In All Shapes And Sizes

Melting pots from Wilton make candy making so easy. You can keep 1 or two colors warm at the same time. The insert comes out so you can also keep piping bags with melted candy warm.

CAKE BALLS (NO COATING): The cake mixture can be prepared a couple days in advance and kept in the refrigerator until ready to use. You can even form the cake balls a day ahead and let them chill in the refrigerator for easier dipping. If you want to prep your cake balls and freeze them, store them in a large freezer bag. They can be kept frozen up to 6 weeks. Let your cake balls come to room temperature before dipping. ***SEE BELOW WHY CAKE POPS CRACK***

COATED CAKE POPS OR CAKE BALLS: Dipped cake pops decorated with Candy Melts can be stored at room temperature for a week. If you use white or dark chocolate, store them in the refrigerator so the chocolate doesn’t melt.

My Little Cupcake Cake Pop Molds

FREEZING CAKE POPS: Once the cake pops are dry, place the decorated cake pops in a freezer safe zip top bag. They will stay fresh up to 6 weeks. When ready to use let them thaw overnight in the refrigerator.

Making cake pops or cake balls just got even easier! Instead of baking a cake, adding frosting to the crumbs, molding the mixture into balls….use a silicone cake pop mold! MAKES 72 1½ INCH CAKE POPS

If your candy shell is cracking, it’s mostly due to an extreme change in temperature (cold cake balls being dipped into hot candy). This can also happen with hot candy or chocolate being put into a cold refrigerator or freezer. To avoid cracking, let your cake balls warm up to room temperature a bit before dipping in warm candy or chocolate. Once dipped, let your cake pops sit at room temperature for 5 to 7 minutes before placing in the refrigerator or freezer so the candy has time to cool.

Heart Cake Pops Maker

If your cake balls are falling off your treat stick, they could be too heavy due to size or adding too much frosting. To help ensure your cake balls stay, be sure to dip the stick in melted candy before inserting it into the cake ball. This hardened candy coating acts as a glue to hold the stick in